PIR sensors EWP1 for ELDES security systems EPIR and ESIM264

EWP1

PIR sensors EWP1

PIR sensor EWP1 is a wireless device with integrated motion detector for use as part of the ELDES wireless security system. The sensor allow expanding security zones administrated by the systems up to 16 additional zones and also the installation is comfortable and simple as it does not require any wired connections between the system devices. The user only needs to turn on the required number of PIR sensors EWP1 and connect them to the control panel, either by sending a command via SMS message or using the ELDES Configuration Tool software.

Technical specifications

Battery Type: ER14505 AA Lithium Thionyl Chloride

Battery Voltage; Capacity: 3,6 V; 2,4 Ah

Battery Operation Time: ~18 months (when operating in standart mode)

Radio transmitter-receiver frequency: 866.1 MHz - 869.5 MHz

Range of Operating Temperatures: -10...+55°C

Dimensions: 104x60x33mm

Coverage: 90°

Maximum Detection Distance: 10 meters

Radion communication range: up to 30m in premises; up to 150m in open areas

Compatible with systems: EPIR868; ESIM264

Download User Manual (.pdf)

Comments

#2 ELDES 2011-06-16 08:26

Dear Austin,
The Configuration software can be downloaded at this link: http://www.eldes.lt/en/software/configuration-tool.html
Best regards,
UAB ELDES

-2 #1 austin roberts 2011-06-15 21:03

where the hell is the configtool software supposedly downloadable from your website www.eldes.lt as described on page 4 section 4.2 of your eldes epir manual

Refresh comments list

Add comment

JComments